How to mount os x 10.6 server dmg to usb

#How to mount os x 10.6 server dmg to usb how to
#How to mount os x 10.6 server dmg to usb mac os x
#How to mount os x 10.6 server dmg to usb mac os
#How to mount os x 10.6 server dmg to usb download
#How to mount os x 10.6 server dmg to usb free

The fans will go crazy and you'll see a screen with two options: The Macintosh HD and your bootable USB.

Once you hear the startup chime, press and hold Option.

If the Mac doesn't run the installer and instead brings you to the login screen, restart the Mac.

If the Mac boots into the installer, you're all good and you can set up the Mac normally.

Eject all other devices connected to the machine, save for the mouse/keyboard and the bootable USB.

If you are planning to restore a machine different from the one you created the USB on, eject the USB from the computer and insert it into the machine you will be restoring.

If the machine it is inserted to is the machine you plan to restore, keep it in and do not eject it.

If it still doesn't say disk1 that's okay, it just might be a little more complicated to deal with later. Perform the same process and ensure that the Disk Identifier is disk1.

Then, insert the bootable USB again and open Disk Utility. If it doesn't, close Disk Utility and eject/remove all other devices connected to the Mac except for the keyboard/mouse. For the majority of people, it will say 'disk1'.

Next, look for an entry named something similar to 'Disk Identifier'.

Look for an entry labeled Partition Number. Press Command+I to open the details/properties menu. This will come in handy if you need to run the installer through Open Firmware. Now, it's time to take some notes on the disk.

The bootable USB should be complete at this point.

Either sit right next to it and move the mouse occasionally, or change the sleep settings in Energy Saver. Wait for it to complete and do not let the Mac lock your profile, run the screensaver, or go to sleep.

Click and drag the volume to the destination field.

Click Image, and select the OS X DMG that you downloaded/copied in the Pre-Install phase.

Once it's done applying your changes, now click on the USB disk volume, which is nested under the disk.

#How to mount os x 10.6 server dmg to usb mac os

Make sure the format is set to Mac OS Extended (Journaled) and that Install Mac OS 9 Disk Drivers is unchecked.

In the dialogue box that pops up, choose Apple Partition Map and press OK.

Under the Volume Scheme dropdown, select 1 Partition.

Once it's done formatting, click on the Partition tab.

Uncheck the 'Install Mac OS 9 Disk Drivers' option.

Ensure the Volume Format selected is Mac OS Extended (Journaled).

In Disk Utility, select the disk (not the volume) and navigate to the Erase tab.

If the Mac says 'cannot read drive', ignore and initialize it anyway.

Find and insert the USB you intend to use into the Mac.

Scan the DMG for restore - Images - Scan Image for Restore.

This will prevent the 'resource busy' error when scanning.

Click the mounted DMG's volume and click 'unmount'.

Unlock the DMG so you can scan it for restore.

Lock the DMG in Finder (Command+I, check Locked - this will prevent the Finder from writing its own metadata to the DMG that could make it unbootable).

#How to mount os x 10.6 server dmg to usb download

The first mirror server will likely provide the fastest download speed. You can use #31 here if you don't have a copy.DMG of OS X Leopard - Download this to your Mac.At least 8 GB USB 2.0 (3.0 can cause problems with certain models).A working Mac different from the one you will restore.NOTICE: Some models are particularly hard to get this to work on - notably the iBook series, where it worked for me on my 2005 iBook G4 exactly one time, and then it never worked again.Д«efore you start the restore process, here's what you'll need:

#How to mount os x 10.6 server dmg to usb free

If something's not clear please feel free to ask me. I had to combine steps from multiple guides to finally get the Mac to boot from the USB, and figured that I'd post a comprehensive guide here. I had followed many guides online but was never able to get the Mac to boot from the USB or install OS X. The iMac already came with OS X 10.5.8 installed but I wanted to do a clean install of the OS for security/performance purposes. So this all started when I got an old iMac G5 iSight model from a computer recycling store.

#How to mount os x 10.6 server dmg to usb mac os x

While this guide is targeted toward Mac OS X 10.5 Leopard, it still applies to other versions of Mac OS X, including any Server versions from 10.4-10.5, and possibly 10.0-10.3 as well (although I havenвЂ™t tested that).

#How to mount os x 10.6 server dmg to usb how to

I figured I would revive this subreddit with a working guide on how to create an OS X Leopard bootable USB for PowerPC models and actually boot the computer from it, and provide some extra tips/software suggestions.